Tempest’s EBS-16, or Box Fan, is a very popular unit for all forms of confined space ventilation. It’s light and small enough to ventilate tight areas but still built to Tempest’s standard of long lasting durability and reliability. Plug it in and suck the smoke/fumes/particulates out from almost any location.
Single Speed AOC Meter
The Tempest EBS-16 comes standard with a single speed electric AOC motor with an output of 0.3 HP or 1.5 HP. These motors are matched perfectly with the fan blade’s size and pitch to produce the most effective air movement possible.
Starting at 47 lbs, the Tempest EBS-16 is one of the more light weight ventilation units available. Its reduced dimensions and frame design allow users to easily carry it to and from the work site.
Formed & Welded Roll-Cage Frame
Not an ounce of Tempest’s well known reliability and durability that comes standard on every fan was sacrificed to meet this unit’s small stature and light weight. The frame is made up of entirely steel; all molded, formed and welded into a sturdy roll-cage design. Like every Tempest, it’s built to last on the job site.
Originally intended for confined space ventilation, the EBS-16 is small enough to hang, sit or fit in a wide array of tight spaces. Whether space is a factor for you for in storing or using ventilation, our box fan will suit you perfectly.
Negative Pressure Ventilator
Negative Pressure Ventilation (NPV), as opposed to Positive Pressure Ventilation (PPV), is the method of using a fan to suck out unwanted particulates rather than blowing them out. The Tempest EBS-16’s size and design is most effective and efficient at NPV; although, PPV may still be utilized to some degree.
|TYPE||Confined Space Fan, Hazardous Locations|
|BLADE||16″ Diameter Assembly Made Up of 6, Air Flex Fiberglass Reinforced Polyamide Blades|
|FRAME||Formed and Welded Sheet Metal Construction with Powder-Coat Finish|
|SHROUD||Integral Component of Frame|
|BUSHING||Keyed Shaft and Set or Cap Screws|
Continuous Circular Wound External-Weld Steel Wire w/ 4 Tie Points for Additional Safety
|MOTOR/DRIVE||0.3 HP or 1.5 HP Single Speed Electric AOC Motor
Designed to run on 15 AMP Circuit
Actual Draw Approx. 6.3 AMP (0.3 HP) or 14.2 (1.5 HP)
|EXPLOSION PROOF MOTOR OPTION||Rated for Class I (Group C & D) and Class II (Group F & G) Environments|
|Part No.||Model No.||DIa.||HP||CFM||Dimensions (W" x D" x H")||Weight|
|913-1000||EB-16-S-0.3||16"||0.3||3,200||18.75" x 14.25" x 19.50"||47 lbs.|
|913-1001||EB-16-S-0.3-EP||16"||0.3||3,200||18.75" x 14.25" x 19.50"||52 lbs.|
|913-1010||EB-16-S-1.5||16"||1.5||11,804||18.75" x 14.75" x 19.50"||59 lbs.|
No manual at this time.
MORE TEMPEST PRODUCTS
All Tempest product lines are distributed through a global network of dealers selected for their industry knowledge, professionalism and commitment to customer service.