Venturi Inductor / Proportioner Leadermix Fibertech 60 And 95

Venturi Inductor / Proportioner Leadermix Fibertech 60 And 95 Foam Equipment LEADERVenturi Inductor / Proportioner Leadermix Fibertech 60 And 95 Foam Equipment LEADER

LeaderMIX FiberTech venturi inductor: In-line proportioner, lightweight and corrosion resistant. Available in 60 or 95 gpm @ 200 psi

  • Wide concentration range
    Thanks to its widely dimensioned dosing valve, LeaderMIX 60 or 95 offers the following possible concentrations: 0.5 – 1 – 2 – 3– 6%.
  • Lightweight
    Thanks to FiberTech Composite, LeaderMIX 60 or 95 weigh less than 5 lbs (without coupling) and are therefore much lighter than most inductors which are often made of bronze.
  • Anti-corrosion
    LeaderMIX 60 or 95 inductors have a body made of FiberTech Composite. They are thus more resistant to foam concentrates and other chemical agents than inductors made of aluminum.

Features

  • Venturi Inductor / Proportioner Leadermix Fibertech 60 And 95 Foam Equipment LEADER
  • Venturi Inductor / Proportioner Leadermix Fibertech 60 And 95 Foam Equipment LEADER
  • Venturi Inductor / Proportioner Leadermix Fibertech 60 And 95 Foam Equipment LEADER

product characteristics

LeaderMIX venturi inductors / proportioners made of FiberTech composite are available in 60 and 95 gpm and, thanks to FiberTech, they are very light. They offer a wide concentration range from 0.1% to 6% suitable for any type of foam concentrate. These proportioners are designed for use at well-defined flow rates and pressures: do not confuse them with LeaderMIX 60-95 which have a wide flow rate range.

Data Sheet

GENERAL CHARACTERISTICS

FLOW RATE 60 gpm @ 200 psi
95 gpm @ 200 psi
OPERATING PRESSURE 200 psi
DOSAGE 0.5 – 1 – 2 – 3– 6%
MATERIAL FiberTech
INLET / OUTLET 1.5’’ NH F / 1.5’’ NH M
WEIGHT 5 lbs without rod
DIMENSIONS W X H X D L. 16‘‘ x w. 7.7‘‘ x h. 7.9‘‘
EXTRACTION TUBE Extraction hose of 1.5m + plunger rod of 1m
OPTION DSP40 couplings

 

Downloads

Cutsheet PDF Product Manual PDF